As we all know, ECM (Engine Control Model) is the kernel unit for Volvo excavator. In general, Volvo ECM is difficult to damage. But it is easy to burn out under the extreme working conditions or short circuit situation. You might need to have another new one or repair the damaged ECM. ECM-repair could be the best choice in following situation: The new controller is in short supply or with high price. SINOCMP Technology provides the Volvo ECM repair service. But please notice following tips when you decide to give us to repair:

1, Did the Volvo ECM was integrated by water before?

Please check if your Volvo ECM was integrated by water before starting the delivery. If so, the electrical board was burned due to short circuit and the chip cannot be used any more.Malfunction problem.

2, Malfunction problem

Please tell the technician the malfunction problem of Volvo ECM in your using process. The Volvo ECM repair will be easy for us to be targeted and time-saving.

3, Shipping Attention

According to Customs regulation, the secondhand product is forbidden to import. So the Volvo ECM repair must be sprayed to make it look new to avoid the risk of return.

4, Provide Repairing Price Range Only

Volvo ECM repair cost for different controllers are different. Only the on-site inspection could find out the real problem. The cost depends on the exact repairing method.

5, Program problem

Generally, we provide the hardware of Volvo ECM repair service. Please tell us the in advance if there is program problem. We cannot have the entire program for the controller. You might need to install program by a local dealer if we do not have it.

6, Declared value around USD60.00

Please declare about 60 dollars when you entrust the ECM to the express company. The tariff will be levied on the base of this price when imported.

We will inform you the restoration, Volvo ECM repair cost and freight cost within 1 week after we get your controller. We’ll deliver your controller in time after your payment confirmation. Here we still have some tips for avoiding board damage again. Please refer to “The Tips for Computer Board Installation”.

As we mentioned above please do leave a comment if you have any suggestions and insights.